The HFX classic is compatible with all ATX components like ATX motherboards, ATX power supplies, standard DVD writers and full size slot cards.

Passive cooling system
The mCubed HFX^® classic is equipped with huge aluminium heatsinks on each side of the chassis. Like with high performance power amplifiers the heat will be dissipated over the heatsinks via natural air convection. The vertical heatsinks have a special rippled surface to enforce the convection. The two main heat sources in a PC are the power supply and the processor. The passive cooled power supply will be mounted directly to the left heatsink. The heat of the processor will be transferred with heatpipes to the right heatsink. VGA and bridge can also be cooled with heatpipes.
While ATX standard is based on active cooling with cold air coming from the front and warm air going out in the back, the HFX is based on natural air convection. This means that cool air is coming from the bottom and warm air is going up to the top. Therefore the mCubed HFX^® classic provides a lot of air holes on the bottom and 3 huges venting holes on the top cover. For safety reasons a 92mm safety fan can be added underneath the right venting hole.

Recommended assessories
CPU cooler - BorgFX CPU or BorgFX CPU deluxe
PSU - ST30NF 300W or ST40NF 400W
Remote control - iMON VFD or VISTA remote
Please note: if you want to use the iMON VFD, then you can use only the ST30NF (the ST40NF is 1cm bigger)

Material	Aluminium
Colour	Black-Black or Black-Silver
Motherboards	Standard ATX and Micro ATX
CPU sockets	754/939/940/775/478/462/479
Power Supply	Passive or Standard ATX
Drive Bay	Exposed	5.25" x 1
	Backside	3.5" x 1
	Hidden	5.25" x 3
Cooling System	Passive (optional)	heatpipes
	Safety (optional)	92mm fan
Expansion Slots	6 full size
Backside	4x Stereo RCA + 1x Scart
Net Weight	14.7 kg
Dimensions	430 mm (W) x 145 mm (H) x 450 mm (D)

Manual